Frequency Range: 10 Hz up to 2.5 MHz
Number of Frequencies: 4 adjustable frequency channels.Adaption of the transmitter output
voltage to the probe, range -40up to 8 dB adjustable in 0.1 dB increments
Probe Matching:Adjustable preamplifier for optimalmatching to the sensitivity of the probe, range 0 up to 78 dB in 6 dB increments with signal level indicator.
Amplifier: Total gain range from -48 up to 126 dB main gain range from -48 bis 48 dB,adjustable in 0,1dB increments,preamplifier range from 0 up to 78 dB,X/Y axis spread from -20 dB up to 20 dB adjustable in 0.1 dB increments
Phase: 360° in 0.1°- increments
Filter: Adjustable low pass and high pass filter range from 0.1 Hz up to 5000 Hz
Depending on the inspection task and the application used for the inspection several channels for signal processing including signal mixing channels areavailable.
Coloured signal display in impedance and chart mode, switchable to display in impedance mode with several signal windows.The dot can be displayed in store ornonstore mode with highlighted signal trace.
Signal display in C-Scan Mode:
Coloured signal display in the impedance window and coloured C-Scan displayin the chart window
Modes of Operation / Probe Types:
The instrument can be used for static testing with hand probes or dynamic operation with rotation probes. All types of probes like SR-probe, bridgeprobes and reflection probes can be connected.
14" / 360mm TFT high luminance active matrix colour display
Height : 125 mm Width : 320 mm
Length : 295 mm without grip
Weight: 6.5 kg
100 to 240V AC (50 to 60 Hz) optional 19V DC with adaptorLi-Ion-battery packs
System In- / Outputs:
- Parallel printer interface Centronics
- Serial interface RS232
- USB connectors for external devices
- Ethernet network connector
- PCMCIA Cardbus
- eddyMax probe connector
- eddyMax system connector
Parameter setting by menus andfunction keys. Storage of the entire parameter setting and signals on hard disk or on external USB storage devices. Integrated touchpad pointing deviceand keyboard
- Hardcopy of the screen display
- Text editor for labeling the screen display prior to the output
- Protocol output with text editor and documentation of the instrument parameters of all used channels
- universal eddyMax ScanMax-Software
- Windows XP
- eddyMax Scan Imaging Software
- eddyMax BoreMax application for 4-frequency
aircraft borehole inspection
- eddyMax RivetLiner application for
inspection of rivetrows on aircrafts
TubeMax application with signal analysis for heat exchanger tube inspection inDevos-Data manager for heat exchanger tube inspection. Interface for programming own applications.
various probe adapters
C-MEC remote field extension probe-push-puller for heat exchanger tube inspection remote controlled polar- and XY-manipulator systems scanner for C-scan testing at flat and rotational symmetric samples probe rotors for borehole and tube testing probes for a wide range of applications test and calibration standards transport bag.